RC Catamaran
About the Project
After four attempts at designing, printing and testing an RC catamaran I finally had something that handled well and planed properly.
The STL files include a version with and without mounting holes for parts. Use the version without holes if you want to mount a different motor and rudder than I have.
Project Video
Files and Links
Parts List
These are the parts I used for my setup and will work off the bat with the 3D printed hull. Rough total for everything below is $120 USD
My Parts
Some of these links are AliExpress affiliate links.
Photo Gallery
Ready to go
FPV
At the River
Version 3 and 4
Fusion 360 Render
Fusion 360 Render